• 44510606 / 44510707
  • Call us on

  • 08:00 am - 08:00 pm
  • Showroom Working Hours

Motor Grader GR215

Overview

Item GR215
Basic parameters Engine model 6CTA8.3-C215
Rated power/speed 160kW/2200rpm
Overall dimension (standard) 8970x2625x3420
Total weight (standard) 16500 kg
Tire specification 17.5-25
Ground clearance (front axle) 430mm
Tread 2156mm
Space of front and rear axles 6219 mm
Space of middle and rear wheels 1538 mm
     
Performance parameters Forward velocity 5、8、11、19、23、38km/h
Reverse speed 5、11、23km/h
Tractive effort f=0.75 87 kN
Maximum gradeability 20%
Tire inflation pressure 260kPa
Working system pressure 16MPa
Transmission pressure 1.3—1.8Mpa
     
Working parameters Maximum steering angle of front wheel ±50°
Maximum slant angle of front wheel ±17°
Maximum oscillating angle of front axle ±15°
Maximum oscillating angle of equilibrium box ±15°
Maximum steering angle of frame ±27°
Minimum turning radius 7.3m
Maximum lifting height 450mm
Maximum shoveling depth 500mm
Maximum lateral inclination angle 90°
Cutting angle 28°—70°
Slewing angle 360°
Length x chord height 4270x610mm
     
Oil filling amount Coolant 50L
Fuel tank 280L
Engine 24L
Transmission 38L
Balancing box 46L
Drive axle 28L
Hydraulic oil 110L

Using Cummins 6CTA8.3-C215 turbocharged diesel engine, the output torque and power reserve factor is large, and the fuel consumption is low.

The gearbox and torque converter are electronically controlled power shifting and fixed shaft gearboxes. The torque converter has a large torque coefficient, a high efficiency, a wide effective area, and a good joint operation characteristic with the engine.

The drive axle is a dedicated XCMG axle.

Rear axle main drive is equipped with "NO-SPIN" without self-locking differential. When one wheel slips, the other wheel can still transmit its original torque.

The service brake is a dual-circuit hydraulic brake system that acts on the two rear wheels of the grader and is safe and reliable.

The sealed cab is used to configure the air conditioning system. The interior parts are sleek and compact plastic parts, which fully reflects the needs of ergonomics.